|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
12-11-2017, 05:15 PM | #1 |
Gone Wild
Join Date: May 2016
Posts: 225
|
any way to bench test OBC?
2000 carry all.My ObC has part #Lester 21065.has 3 conductor duetch/weatherpac type connector red/yellow/brown.thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-11-2017, 05:18 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: any way to bench test OBC?
Yes, if it's new it works
|
12-11-2017, 05:22 PM | #3 |
Gone Wild
Join Date: May 2016
Posts: 225
|
Re: any way to bench test OBC?
|
12-11-2017, 05:29 PM | #4 |
Gone Wild
Join Date: May 2016
Posts: 225
|
Re: any way to bench test OBC?
i tryed testing the blue/red wires that go to relay monted on floor of charger with VOM.no batt voltage there when plugging charger into wall.this unit has an onboard charger tha is hard-wired to OBC and 48v contactor
|
12-11-2017, 06:03 PM | #5 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: any way to bench test OBC?
Without being Lester, I am not sure of any way you could properly check all facets of the OBC. I mean it has algorithms, charger controls, disabling functions, maintenance timers, etc. etc. so without being the OEM, I just don't know how you could check all that. It is kinda like scottyb said above....
|
12-11-2017, 07:05 PM | #6 |
Gone Wild
Join Date: Apr 2017
Location: SE TN
Posts: 2,226
|
Re: any way to bench test OBC?
Replace with known good.
|
12-12-2017, 05:16 AM | #7 |
Gone Wild
Join Date: Jan 2017
Location: Queensland Australia
Posts: 1,332
|
Re: any way to bench test OBC?
Bypass it, toss it in the bin (you probably have it out of the cart already) and buy a new smart charger (rather than putting any money to a new OBC).
|
12-12-2017, 07:27 AM | #8 | |
Gone Wild
Join Date: Dec 2016
Location: Kingsland, Georgia
Posts: 1,825
|
Re: any way to bench test OBC?
Quote:
I'll bet you can get a new DPI charger for around the same price as a new OBC. And you'll maintain your batteries better to boot! Last edited by Tom47; 12-12-2017 at 07:30 AM.. Reason: Added info |
|
12-12-2017, 07:35 AM | #9 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: any way to bench test OBC?
I helped another member a while back with an onboard setup, maybe this will help verify the issue is the OBC and not the charger itself:
http://www.buggiesgonewild.com/elect...ml#post1254188 |
12-12-2017, 10:47 AM | #10 | |
Gone Wild
Join Date: May 2016
Posts: 225
|
Re: any way to bench test OBC?
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Bench test ITS | Electric EZGO | |||
how to bench test 1204-410 | Electric Club Car | |||
Bench test controllers??? | Electric EZGO | |||
How to Bench Test a controller | Electric EZGO | |||
Bench Test | Electric Club Car |