|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-16-2018, 03:40 PM | #1 |
Not Yet Wild
Join Date: Mar 2017
Location: Cincinnati, Oh
Posts: 33
|
Alltrex XTC install question
Hi, I'm upgrading to an Alltrex XTC due to a burned out stock controller, but I have a couple of install issues. My cart is a 2006 Precedent IQ. Serial number starts with PQ-06. I can't account for the stock 4 pin plug and don't see it mentioned anywhere in the Alltrex documentation. Also, there doesn't seem to be any holes that line up either with the controller itself, or the universal adapter that was included with the controller. Very strange, but I'm about to get some self tapping screws so I thought I would ask here first. Thanks!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-16-2018, 03:43 PM | #2 |
Gone Wild
Join Date: Jan 2017
Location: Miami, FL
Posts: 1,061
|
Re: Alltrex XTC install question
The 4 pin plug is for the diagnostic port on the stock controller and is not used with the Alltrax.
I didn’t bother with the mounting plate and just drilled new holes. |
07-16-2018, 04:13 PM | #3 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Alltrex XTC install question
Yes, as E36 said, but don't toss that 4-pin connector as you can modify it and use it for your own mode switch....
|
07-16-2018, 09:07 PM | #4 |
Not Yet Wild
Join Date: Mar 2017
Location: Cincinnati, Oh
Posts: 33
|
Re: Alltrex XTC install question
Thanks guys, really puts my mind at ease, I just wish they had informed me of that in the install documentation.
|
07-17-2018, 06:29 PM | #5 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Alltrex XTC install question
What vehicle are you installing it on? The universal adapter is not needed for Club Car applications. Just drill four holes and put some 1/4" bolts in it.
|
07-24-2018, 02:51 PM | #6 |
Not Yet Wild
Join Date: Mar 2017
Location: Cincinnati, Oh
Posts: 33
|
Re: Alltrex XTC install question
Thanks everyone, controller worked great, 21 mph and no issues. You guys are great!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Help with alltrex code | Electric EZGO | |||
Wanted GE got Alltrex | Electric Club Car | |||
J5 plug on alltrex controller | Electric EZGO | |||
Programming Alltrex Controller | Electric EZGO | |||
First time upgrading controller&motor. Need help with alltrex | Lifted Golf Carts |