10-30-2021, 12:38 PM | #1 |
Not Yet Wild
Join Date: Mar 2016
Posts: 8
|
Clutch removal
Does engine have to be removed? Need to replace the shaft seal so I have to get the clutch off. Any advice will be appreciated.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-05-2021, 11:44 PM | #2 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,442
|
Re: Clutch removal
Crank seals are much easier while the engine is out of the cart. If you take all the surrounding parts off, even the body, you could do it in the cart I suppose. Or if you dropped the swing arm down you might be able to get enough room to do it. Yes the clutch needs to be removed if you're working on the clutch side crank seal.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2004 MPT driven clutch removal: Manual says "slide the clutch from the...shaft" | Gas EZGO | |||
Tips & Hints for installing Clutch Tuning Kit, Removal of Drive Clutch | Gas Club Car | |||
Clutch removal? | Gas Yamaha | |||
99 EZ GO clutch removal | Gas EZGO | |||
clutch removal | Gas EZGO |