![]() |
|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Not Yet Wild
![]() Join Date: Jun 2009
Location: TN
Posts: 45
|
![]() I purchased a set of new OEM Front Fender Flares to install on my 98 ST-350.
It appears that the Flange that the old flares attached to is not needed due to a design change in the flare. Can anyone confirm that the flanges can be removed or the flares can be installed over top of the flange. I would prefer to cut the flange off because they were damaged when the original flares were torn off... Thanks, Mike |
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Happy Carting
![]() ![]() Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
![]() Can you post pics?
![]() |
![]() |
![]() |
![]() |
#3 |
Gone Wild
![]() Join Date: Feb 2009
Location: P-COLA
Posts: 1,176
|
![]() |
![]() |
![]() |
![]() |
#4 |
Not Yet Wild
![]() Join Date: Jun 2009
Location: TN
Posts: 45
|
![]() Top Picture: Flare is the Old Style with an Angled Flange and the Rivets install at an angle.
Bottom Picture: New Flare has an added Vertical Flange and Rivets install Horizontal. I will admit I haven't studied it too close but I believe the flange on the body can be removed and horizontal holes drilled to attach. The LH side flange is cracked and part of the RH side is missing. Thanks for looking |
![]() |
![]() |
![]() |
#5 |
Happy Carting
![]() ![]() Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
![]() "I will admit I haven't studied it too close but I believe the flange on the body can be removed and horizontal holes drilled to attach."
That's what I thought too ![]() |
![]() |
![]() |
![]() |
#6 |
Gone Crazy
![]() Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
![]() Looks like it could be just installed over the exsisting flange.
Do some test fitting and let us know what you come up with......... |
![]() |
![]() |
![]() |
#7 |
It ain't gonna be easy.
![]() Join Date: Apr 2008
Location: St. George, SC
Posts: 1,480
|
![]() looks like you could go over the old flange and drill it in.
|
![]() |
![]() |
![]() |
#8 |
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
![]() On the new ones the flange on the flare goes behind the cowl and the cowl has no flange. I'm not sure which one would be best to cut, kinda seems like you could do it either way.
|
![]() |
![]() |
![]() |
#9 | |
Not Yet Wild
![]() Join Date: Jun 2009
Location: TN
Posts: 45
|
![]() Quote:
Thanks |
|
![]() |
![]() |
![]() |
Tags |
98 st-350 |
|
|
![]() |
||||
Thread | Forum | |||
horrible frontend alignment | Gas Yamaha | |||
fender flares | Design Center | |||
Gearbox Information Required | Design Center | |||
workhorse frontend | Golf Carts and Parts |