|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-22-2011, 08:49 AM | #1 |
Not Yet Wild
Join Date: Mar 2011
Location: S Carolina
Posts: 7
|
Rear seat ID needed
Newbie and need little help with the id of a rear stationary seat. What parts do I need to install this on a 1994 EZ-GO Metalist. Currently the cart has the bag carrier and strap mounted to the rear top supports. From the looks of it I need some type of new mounting brackets once I remove the bag carrier. Also think I'm missing a bottom support that goes under the bottom of the seat to keep it off the rear fenders. Here's a picture of the seat I looking for some help ID'ing
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-22-2011, 09:00 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Rear seat ID needed
These pics are from a different make. I don't know that seat but you can sort of see where the brackets go. They will also have to support the front seat back.
|
03-22-2011, 11:58 AM | #3 |
Not Yet Wild
Join Date: Mar 2011
Location: S Carolina
Posts: 7
|
Re: Rear seat ID needed
Thanks for the pictures this gives me more info on how the supports go under the seat. Any info on the type of mounting brackets I need when I remove the bag carrier?
Last edited by Wesz71; 03-22-2011 at 11:59 AM.. Reason: spelling error |
|
|
Similar Threads | ||||
Thread | Forum | |||
vinyl seat adhesive needed. | Gas EZGO | |||
Are the rear shocks really needed with HD rear springs? | Electric EZGO | |||
94 or newer 4 cylinder rear end needed | Golf Carts and Parts |