Alltrax NPX 4834 in a 91 Marathon

[tonywebb76]

Does anyone have a picture of this installed? In the wiring diagram provided by alltrax they reference an orange 1/2 speed reverse wire and a red key switch wire? Is the key switch wire the KSI? If not, where would the KSI wire go? Where is the orange 1/2 speed reverse wire? Is that the orange wire from the solenoid to the POT switch?

Help

[scottyb]

KSI= key switch ignition This connects to #1 on the controller, the blk and wht from the pot connect to 2 & 3 in any order and do not use #4 reserved for TXT orange wire. The marathon uses 2 wires from the pot to the reverse F&R micro to activate 1/2 ohm signal output from the pot for reverse IF NEEDED but not necessary.... I hope this helps.

[tonywebb76]

Thanks. Works now. Just didn't want to proceed w/o knowing.

[scottyb]

Glad we could help!