|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-13-2012, 11:06 PM | #1 |
Not Yet Wild
Join Date: Jul 2012
Location: USA
Posts: 10
|
3 wheel ez-go
I have a 3 wheel ezgo, and can't get fire to pedal, I can put light tester on negative battery post and touch small terminal on solenoid, press gas and it moves, but remove test light and nothing when I press gas, is there a clear diiagram, or anyone know what's up with it??
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-14-2012, 07:52 AM | #2 |
Gone Wild
Join Date: Sep 2010
Location: Florida
Posts: 1,895
|
Re: 3 wheel ez-go
That sounds like your test light is providing a ground for the cart...run a wire from that post to your main negative and try pedal...
|
07-14-2012, 08:18 AM | #3 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: 3 wheel ez-go
Make sure your grounds are clean at the frame-rail,near the battery.All the grounds meet there.Follow each ground,and remove and clean them as well.There are diagrams under the Ez-Go Gas-Section.Hope this helps.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Lugnut, stud, rear wheel problem (wheel came off) | Lifted Golf Carts | |||
3 wheel marathon to 4 wheel conversion | Gas EZGO | |||
Rear Wheel Studs too Short for 3 inch wheel Spacer | Electric EZGO | |||
Harley 3 wheel front wheel seals | Gas Harley Davidson | |||
Alignment of Steering Wheel Only - Wheel Base Straight | Gas Yamaha |