|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
06-30-2017, 12:56 PM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2017
Posts: 8
|
Gas workhorse 480 not shutting down
My cart will keep idling/running when I take my foot off the gas. I have tested the micro switches, OK. Replaced the solenoid, no change. Anybody have any ideas? Rog
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-30-2017, 02:55 PM
|
#2 |
|
Not Yet Wild
Join Date: Aug 2016
Posts: 35
|
Re: Gas workhorse 480 not shutting down
Same Issue Here
|
|
|
|
|
06-30-2017, 03:05 PM
|
#3 |
|
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,666
|
Re: Gas workhorse 480 not shutting down
Might not be idling/running at all just the starter turning it over. Don't know about 480s but mine
did the same thing and an adjustment on the cable at the governor on top the rearend fixed it. |
|
|
|
|
06-30-2017, 07:40 PM
|
#4 |
|
Not Yet Wild
Join Date: Jun 2017
Posts: 8
|
Re: Gas workhorse 480 not shutting down
No, it's the gas motor that is running.
|
|
|
|
|
07-01-2017, 12:42 PM
|
#5 |
|
Not Yet Wild
Join Date: Aug 2016
Posts: 35
|
Re: Gas workhorse 480 not shutting down
So far I found that if your throttle doesn't return all the way, it won't shut off.
|
|
|
|
|
07-01-2017, 02:37 PM
|
#6 |
|
Not Yet Wild
Join Date: Jun 2017
Posts: 8
|
Re: Gas workhorse 480 not shutting down
The gas pedal returns and the micro switches return to the original positions. Also even though the micro switches are operational the top one does not ever show power coming in or out of. That's the ones with the black and white wire.
|
|
|
|
|
07-01-2017, 02:52 PM
|
#7 |
|
Gone Wild
 Join Date: Aug 2009
Location: Santuck,Al
Posts: 1,747
|
Re: Gas workhorse 480 not shutting down
Starter solenoid may be sticking (I know you swapped it out but if all else fails check it to be sure).
|
|
|
|
|
07-01-2017, 03:47 PM
|
#8 |
|
Not Yet Wild
Join Date: Jun 2017
Posts: 8
|
Re: Gas workhorse 480 not shutting down
Yeah, I know , I know. It's just hard to convince myself that it's a new, bad solenoid. I check it. The problem did not happen overnight. It was gradual, slow to shut down. Then slower and slower till nothing.
|
|
|
|
|
07-01-2017, 04:14 PM
|
#9 |
|
Gone Wild
Join Date: Aug 2009
Location: Santuck,Al
Posts: 1,747
|
Re: Gas workhorse 480 not shutting down
Check to be sure the kill wire(s) are plugged up & have good connection (located on front left of engine cowl).
|
|
|
|
|
07-01-2017, 05:09 PM
|
#10 | |
|
Gone Wild
Join Date: May 2017
Location: Martinsville, Indiana
Posts: 197
|
Re: Gas workhorse 480 not shutting down
Quote:
Not to derail, I am digging the maytag. |
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Not shutting off when hot? | Gas Club Car | |||
| Help with shutting down | Electric Club Car | |||
| g-14 shutting down | Gas Yamaha | |||
| keeps shutting off | Gas Club Car | |||
| Par Car keeps shutting down | Gas Columbia ParCar | |||
Linear Mode
