|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-06-2020, 04:39 PM | #11 |
Not Yet Wild
Join Date: Feb 2020
Location: Winter Garden, Fl.
Posts: 7
|
Re: Drive 2 sluggish
I reinstalled the elbow and the belly pan on my cart. If you look in the elbow it has some metal inside to protect it from the heat. Mine has been this way for a while with no issues.
I imagine if you left it off the fumes and heat in the engine compartment would be pretty bad since there’s no tail pipe. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-07-2020, 11:59 AM | #12 |
Not Yet Wild
Join Date: May 2020
Location: Jax Beach, FL
Posts: 5
|
Re: Drive 2 sluggish
Was just looking for this same info and wondered if there was a risk with the plastic components and heat from the exhaust. Thanks for elaborating on the topic!
|
05-07-2020, 03:48 PM | #13 | |
Getting Wild
Join Date: Jun 2014
Location: Kemah, Texas
Posts: 146
|
Re: Drive 2 sluggish
Thanks!
Quote:
|
|
05-08-2020, 12:34 PM | #14 |
Getting Wild
Join Date: Jun 2014
Location: Kemah, Texas
Posts: 146
|
Re: Drive 2 sluggish
I took mine off last night...
The bottom pan gets pretty hot, hopefully it will be ok? |
05-09-2020, 07:11 AM | #15 |
Gone Wild
Join Date: May 2015
Location: Central Florida
Posts: 2,114
|
Re: Drive 2 sluggish
The Arrestors get clogged all the time. We just take them off, put everything back and call it a day. Havent seen any issues by doing that.
|
05-09-2020, 08:53 PM | #16 |
Gone Wild
Join Date: Dec 2009
Location: Corpus Christi, TX
Posts: 1,644
|
Re: Drive 2 sluggish
When do you think the arrest or is an issue or how many hours do you all have on your cart?
|
05-11-2020, 01:18 PM | #17 |
Not Yet Wild
Join Date: Feb 2018
Location: Senoia, GA
Posts: 14
|
Re: Drive 2 sluggish
|
06-01-2021, 08:49 AM | #18 |
Not Yet Wild
Join Date: Jun 2016
Posts: 1
|
Re: Drive 2 sluggish
How do you loosen the clamp on the spark arrestor? It looks like you need an Allen wrench for the bolt but there isn’t enough room to use it.
|
06-01-2021, 10:36 PM | #19 |
Getting Wild
Join Date: Jun 2018
Posts: 76
|
Re: Drive 2 sluggish
I used channel locks to rotate the arrestor/clamp assembly, then there was plenty of room for the allen wrench. Voila!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G22 Sluggish on top end | Gas Yamaha | |||
2009 Ymamha Drive G29 shifting and sluggish | Gas Yamaha | |||
little sluggish | Gas EZGO | |||
G1 very sluggish | Electric Yamaha | |||
Sluggish | Electric Club Car |