|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
05-05-2018, 10:29 AM
|
#11 |
|
Gone Wild
 Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,182
|
Re: New Coil, Ignitor, Pulsar, Plugs, No Spark
If it turns over the switches are good. Check for voltage on the red wire going to the coil.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-05-2018, 03:12 PM
|
#12 |
|
Crazy Wild
Join Date: Jun 2015
Location: Carolina Lowcountry
Posts: 796
|
Re: New Coil, Ignitor, Pulsar, Plugs, No Spark
There's nothing left but a rewire.
How do I access ignition switch? I drill the 2 rivets below it? |
|
|
|
|
05-06-2018, 10:26 AM
|
#13 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,182
|
Re: New Coil, Ignitor, Pulsar, Plugs, No Spark
If it is factory rivets the center pin pushes out and drops into a cavity behind it. If they have been replaced they probably will have to be drilled out. That said if it is turning over it is not the switch.
|
|
|
|
|
05-23-2018, 05:48 PM
|
#14 |
|
Crazy Wild
Join Date: Jun 2015
Location: Carolina Lowcountry
Posts: 796
|
Re: New Coil, Ignitor, Pulsar, Plugs, No Spark
The demon cart is still haunting me.
I was messing with it the other day and it decided to spark. I have no idea why. Then it quit sparking and now only sparks when I step on or let off the pedal. I'm getting 9.5v at coil when I step on pedal. I ran wire from battery to coil, it made no difference. |
|
|
|
|
05-23-2018, 11:00 PM
|
#15 |
|
Gone Wild
Join Date: Jan 2015
Location: Stephenville, TX
Posts: 202
|
Re: New Coil, Ignitor, Pulsar, Plugs, No Spark
A friend of mine had a 96 EZ Go that he replaced all those parts and still no spark. I believe his problem wound up being bad connection in a 4 pin Molex plug.
|
|
|
|
|
05-23-2018, 11:49 PM
|
#16 |
|
British born Nincompoop
Join Date: Feb 2007
Location: United Kingdom
Posts: 2,461
|
Re: New Coil, Ignitor, Pulsar, Plugs, No Spark
Usually no spark is down to one or more connectors corroded. Usually the one at the coil connection.
A long shot, but sometimes a single spark intermittently is the battery connected the wrong way round. An easy mistake to kake if you have ring terminals connecting it. |
|
|
|
|
05-25-2018, 04:26 PM
|
#17 |
|
Crazy Wild
Join Date: Jun 2015
Location: Carolina Lowcountry
Posts: 796
|
Re: New Coil, Ignitor, Pulsar, Plugs, No Spark
Made an ignitor/ harness bypass.
Got spark, looks weak. Getting a 3 volt voltage drop when I crank buggie. Going to charge battery. |
|
|
|
|
05-25-2018, 06:26 PM
|
#18 |
|
Crazy Wild
Join Date: Jun 2015
Location: Carolina Lowcountry
Posts: 796
|
Re: New Coil, Ignitor, Pulsar, Plugs, No Spark
It will crank, then starts backfiring.
|
|
|
|
|
07-10-2018, 01:08 PM
|
#19 |
|
Not Yet Wild
Join Date: Jul 2018
Posts: 9
|
Re: New Coil, Ignitor, Pulsar, Plugs, No Spark
Did you ever figure out what your issue was? Sounds kinda similar to an issue I'm having.
|
|
|
|
|
07-10-2018, 03:42 PM
|
#20 |
|
Gone Wild
Join Date: May 2010
Location: Plainwell mi but from Ohio GO BUCKS!!!
Posts: 167
|
Re: New Coil, Ignitor, Pulsar, Plugs, No Spark
My battery is brand new. Do you justjump the positive wire from the battery to the ignition coil or do you run both?
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Yamaha jf2 ignitor, coil, pulsar coil for sale | Golf Carts and Parts | |||
| G14 Pulsar Coil | Gas Yamaha | |||
| Pulsar coil | Gas EZGO | |||
| Pulsar coil | Gas EZGO | |||
| Pulsar Coil and Ignitor | Gas EZGO | |||
Linear Mode
