1999 TXT DCS w/Curtis controller will not move after being towed in run mode

kgsc · 09-13-2021, 08:12 AM

Blue will be the negative wire on the activation circuit and will go to ground when ready.

JohnnieB · 09-13-2021, 10:16 AM

Quote:

Originally Posted by aczlan

Ah, I had just looked at the pin names on the motor and didn't realize that both Series and SepEX used the same 4 pin names (A1/A2 & S1/S2). Good to know.

--------------------------

The DCS was EZGO's first attempt at a SepEx drive and not an entirely successful one. Later versions had better controllers and better motor labeling.

Except for the DCS motor, the terminals for the stationary fields on SepEx motors used in EZGO carts are label F1 & F2.

09-13-2021, 08:12 AM	#11
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,147	Re: 1999 TXT DCS w/Curtis controller will not move after being towed in run mode Blue will be the negative wire on the activation circuit and will go to ground when ready.

Similar Threads
Thread	Forum
Wiring for 1999 1206 Curtis controller	Electric EZGO
Towed cart IN TOW MODE at slow speed motor leaking fluid	Electric Club Car
EZGO TXT 1999- new controller-will barely move	Electric EZGO
Towed in Run mode!	Electric Club Car
2007 club car carryall won't move after being towed	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum