|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
10-15-2012, 10:00 AM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2012
Posts: 13
|
how do it get the "most torque" from my stock 48v DS?
Hey Everyone! Im a newbie but I have been reading around here a lot to edjumicate myself (haha)..
Im building a 99 DS 48v into a hunting buggie.. My question is how do I get the MOST out of my stock "48v DS series" set up. I will be adding a long travel suspension, 22 to 23 in tires.. looking for torque mostly..I live in Florida, its wet,muddy and NO HILLS! Batteries seem decent but the cables are thin, I was thinking new cables for sure, but not sure on anything else. Can this cart be programmed to be more torquey? Any other advise? I will post the build up as it goes. Thanks! Last edited by archerdude22; 10-15-2012 at 10:01 AM.. Reason: wrong photo |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-15-2012, 10:09 AM
|
#2 |
|
Getting Wild
Join Date: Jun 2012
Location: Sumter, SC
Posts: 111
|
Re: how do it get the "most torque" from my stock 48v DS?
What type of budget are you looking at? I would do cables first. You will notice a difference with just those. Then I would do a motor and controller combo focused on torque. It will be a little costly but make a huge improvement. I have a speed motor in mine but with a 500amp controller I can spin the tires and do donuts in grass. I would recommend talking to Plum Quick, one of the supporting vendors. They will get you exactly what you need
|
|
|
|
|
10-15-2012, 10:15 AM
|
#3 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,399
|
Re: how do it get the "most torque" from my stock 48v DS?
Increase the amount of amperage the motor is allowed to access. Amperage = torque in DC drives. Along with a bigger controller you will need a bigger solenoid and larger cables throughout and a HD F&R if the cart is a series cart, you didn't say?
|
|
|
|
|
10-15-2012, 10:23 AM
|
#4 |
|
Gone Wild
Join Date: Dec 2010
Posts: 487
|
Re: how do it get the "most torque" from my stock 48v DS?
Have a look at www.alltraxinc.com go to the document depo and the technical notes, there is some usefull info and guidance on upgrading.
|
|
|
|
|
10-15-2012, 11:00 AM
|
#5 |
|
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: how do it get the "most torque" from my stock 48v DS?
keep in mind when you do cables you have to do all 6 gage cables over to 4 or bigger...if you do just battery cables its a waste of time and money....................you should really talk with scotty if anyone can help you its him and he also makes just about the best cables out there..........................
 |
|
|
|
|
10-15-2012, 11:23 AM
|
#6 | |
|
Not Yet Wild
Join Date: Sep 2012
Posts: 13
|
Re: how do it get the "most torque" from my stock 48v DS?
Quote:
|
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Looking for Yamaha "Drive" stock roof | Gas Yamaha | |||
| Installed 15:1 torque gears need Help "soon" please | Electric EZGO | |||
| Very "Jumpy" after Torque & Speed Upgrades | Extreme DC! | |||
| limo stock tire height " clutch and gears?" | Gas EZGO | |||
| 12" wheels &/or 20" diameter tires on stock Yamaha | Electric Yamaha | |||
Linear Mode
