G9 seat Bottom broken

[jackel440]

Ok guys,I need to redo my seats.My seat has been ripped and destroyed on the corner real bad for a long time.The foam is wore away,so I am going to need new foam.My problem is the plastic bottom is corner is broke and is missing some of it.So I have nowhere to staple the material to when recovering the seat.Can I just fiberglass it to the shape it is supposed to be?Will I be able to staple through it if i fiberglassed it?
Or is there a better option to fix it?

[jackel440]

OK,I got some pics to show what i'm talking about.any ideas?

and another

[ewbldavis]

Man...my suggestion would be to take measurements and make a whole new seat. I made mine using 3/4" plywood and 4" HD foam/vinyl from Jo Ann Fabrics.

You could make new seat and staple vinyl to plywood, then transfer any hooks/hip bars from the old seat. Not sure on bottom cover for yours - I didn't cover mine as whole body lifts for engine access. Pic is below (hip bars/seat backs are EZgo parts).

[jackel440]

the problem it looks like is that the seat bottom is not flat that I can tell.Looks like the outer lip of the plastic drops down to fit the relief in the lower body.I haven't removed it yet,but I am going to have to address this so i can recover it.