lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Melex


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-10-2014, 02:43 PM   #1
cdj901
Not Yet Wild
 
Join Date: May 2014
Posts: 2
Question Melex 252 forward/reverse switch wiring problem

i have replaced the f/r switch on a old model 252 . all battery cables are in the right place but there are 3 smaller wires that im confused as to the location, 2 of which are the micro switch, i believe them to be wired correctly but the bottom terminal of the f/r switch also had a small wire that was missing all but the connector. so my question is what wire other than the battery cable connects to the terminal at the 6 oclock position of the forward reverse switch . i have tried to find wiring diagrams but all they show are the battery connections. any help would be great. thanks!
cdj901 is offline   Reply With Quote
 
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Melex


Thread Tools
Display Modes


Similar Threads
Thread Forum
Forward Reverse switch wiring. Electric Club Car
wiring new forward reverse switch Electric Club Car
forward reverse switch wiring Electric Club Car
Question about wiring from forward/reverse switch Electric EZGO
forward/reverse switch wiring Electric Club Car


All times are GMT -5. The time now is 08:08 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.