![]() |
![]() |
#1 |
Not Yet Wild
Join Date: Apr 2020
Posts: 1
|
![]() I have swap installed and running but the clucth set up is not correct wot it will only run primary belt about haft way up the clucth .the cart has a lift and ten inch wheels all I need . my guess it runs about six mph. would really like to just change drive clucth.any ideas ? like comet 1190 adjustable? 20 mph would be nice. ez workhorse 1200.
|
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Not Yet Wild
Join Date: Mar 2017
Posts: 18
|
![]() Im running a comet 780 on my 3cylinder .9L yanmar. I had to change out springs and weights to get it to engage at 800rpm. I also cut the stock driven spring I believe it was 3/4 of a coil. Definitely not a speed demon I'm running 8:1 high speed gears I cruise at a decent rpm 15mph WOT 22mph. Running 23" tires.
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
Diesel swap with clutch upgrades? | Diesel swaps | |||
2000 EZ-GO Workhorse - tire size? Belt size? | Gas EZGO | |||
New Workhorse what size tires? | Lifted Golf Carts | |||
Max tire size for workhorse | Gas EZGO | |||
Diesel Powered EZGO Workhorse | Big Block Talk! |