![]() |
|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Gone Wild
![]() Join Date: Oct 2007
Location: Madison, Indiana
Posts: 186
|
![]() I have step by step instructions on how to install new crankshaft seals.. both sides. Detailed and has pictures.. If anyone wants a copy of this, send me an email at jb_dinos@yahoo.com
It's a 12mb file though. |
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Gone Wild
Join Date: Nov 2009
Posts: 250
|
![]() Can you please send me the file to replace the seals on a G1.
My email is stephenlkarp@yahoo.com Thanks, Stephen |
![]() |
![]() |
![]() |
#3 |
......................
![]() Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,379
|
![]() That was you that posted the step by step seal change, the clutch side and the fan side that was some great info --That gets two
![]() ![]() JBDiNos--Thanks |
![]() |
![]() |
![]() |
#4 |
Gone Wild
![]() Join Date: Oct 2007
Location: Madison, Indiana
Posts: 186
|
![]() |
![]() |
![]() |
![]() |
#5 |
Not Yet Wild
![]() Join Date: Sep 2008
Location: sanford,nc
Posts: 36
|
![]() Will you please send me the file on replacing seals on g1 ,my email is ireneandjack@windstream.net,thanks Jackie
|
![]() |
![]() |
![]() |
#6 |
Not Yet Wild
Join Date: Jun 2011
Posts: 14
|
![]() hello i was wondering if anybody still has these instructions
|
![]() |
![]() |
![]() |
#7 |
......................
![]() Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,379
|
![]() |
![]() |
![]() |
![]() |
#8 |
Not Yet Wild
Join Date: May 2012
Posts: 2
|
![]() This is great! Im in need of doing my crank seals. Any suggestions on where to purchase said seals? Online?
|
![]() |
![]() |
![]() |
#9 |
Not Yet Wild
![]() Join Date: Jul 2013
Location: virginia
Posts: 6
|
![]() i cant seem to get my seal in right on fan side cause when i tapin 1 side the other comes out then i tap the side that comes out then the 1 i just tapped in comes out please help im thinking about puting some kind on pipe on it and tightning the bolt to puch it in evenly
|
![]() |
![]() |
![]() |
#10 |
Searching for The Way
![]() ![]() Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,181
|
![]() Try rotating the engine so the cylinder doesn't hold pressure.
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
Yamaha Torque Kit Instructions | Gas Yamaha | |||
want to sell step bars | Golf Carts and Parts | |||
Ordered my lift kit from BU Need instructions | Lifted Golf Carts | |||
Usable step/running boards | Electric Club Car | |||
step/hitch | Design Center |