G14a transmission

letitbe · 02-17-2018, 11:35 PM

found belt. Thz

cgtech · 02-18-2018, 12:42 AM

Quote:

Originally Posted by sformal

Strange, when I first installed the spring (from CPP), I was using the original Yamaha belt and had no trouble for almost 1.5 years...

When I installed the High speed gear, I switched at the same time to the GBoost Severe duty; a really good belt!

My buddy was going through a stock belt on his Can am commander every time he went to the dunes. I hooked him up with a Gboost belt, and he hasn't done a belt since.

letitbe · 02-18-2018, 10:13 PM

I've read about a machined inner sheave. Should my stock sheave be ok?

cgtech · 02-19-2018, 01:12 AM

Put a straightedge on yours , the closer to flat it is , the better. Big dish is bad. I'm talking about the surface the belt rides on. Also check for reasonable bushing tightness and good seals.

02-17-2018, 11:35 PM	#21
letitbe Not Yet Wild Join Date: Jun 2012 Location: Iowa Posts: 59	Re: G14a transmission found belt. Thz

02-18-2018, 10:13 PM	#23
letitbe Not Yet Wild Join Date: Jun 2012 Location: Iowa Posts: 59	Re: G14a transmission I've read about a machined inner sheave. Should my stock sheave be ok?

02-19-2018, 01:12 AM	#24
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: G14a transmission Put a straightedge on yours , the closer to flat it is , the better. Big dish is bad. I'm talking about the surface the belt rides on. Also check for reasonable bushing tightness and good seals.

Similar Threads
Thread	Forum
G14a won't start	Gas Yamaha
Old Yamaha G14a is dying	Gas Yamaha
CPP speed spring for G14A	Gas Yamaha
g14a wont turnover	Gas Yamaha
G14A Starter wiring	Gas Yamaha

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum