|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-26-2018, 06:57 PM | #11 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: Altrax PDS controller settings
Funny humming noise may be key. Questions
Have we got a stripped hub that is spinning/slipping on the axle? Have we got a bad battery (pack) that is dropping way down in voltage when you try to go... This can be tested with any voltmeter connected to the pack when you try to go uphill... what's the voltage reading when the cart is failing to perform? Remove the rear hubcaps so the axle nut is exposed. Have somebody watch when you try to start uphill fast, does the nut turn faster than the tire? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-26-2018, 07:04 PM | #12 |
Not Yet Wild
Join Date: Aug 2018
Location: Summerville, SC
Posts: 67
|
Re: Altrax PDS controller settings
Humming was when I had solenoid wires (blue and yellow) backward and it wouldn’t run. Switched those last night all good codes on controller. Tested battery pack too and all good, no drop on voltage. . Cart has very slow speed and no power up slight incline.
|
11-26-2018, 09:22 PM | #13 |
Gone Wild
Join Date: Apr 2017
Location: SE TN
Posts: 2,226
|
Re: Altrax PDS controller settings
Have you connected your PC and checked if all of the Alltrax toolkit settings are correct?
|
11-27-2018, 08:36 AM | #14 |
Not Yet Wild
Join Date: Aug 2018
Location: Summerville, SC
Posts: 67
|
Re: Altrax PDS controller settings
I have not gone that far yet. it was my understanding controller would already be set for my cart. want to make sure wiring is correct first.
|
11-27-2018, 09:00 AM | #15 |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Re: Altrax PDS controller settings
Make sure you plugged the speed sensor cable in to the new controller. Then check all the settings with the tool kit.
Sent from my SM-G930R4 using Tapatalk |
11-27-2018, 05:49 PM | #16 |
Not Yet Wild
Join Date: Aug 2018
Location: Summerville, SC
Posts: 67
|
Re: Altrax PDS controller settings
Today at lunch I went over multiple pics and questions on other installs. Got home today to check everything over again. Discovered I plugged a 3 pinned plug into the receptical for the optional dash speed control dial. Plugged it into the correct J1 plug and old girl sped right along! Thanks for the input and assistance all. Much appreciated!!
|
11-27-2018, 07:18 PM | #17 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: Altrax PDS controller settings
Whoo - Hoo!!!
Enjoy the rides. |
11-27-2018, 08:00 PM | #18 |
Not Yet Wild
Join Date: Aug 2018
Location: Summerville, SC
Posts: 67
|
Re: Altrax PDS controller settings
Special thanks to you Scotty for the help with purchase and fast service. Will spread the good word to my fellow cart riders in the hood.
|
11-27-2018, 08:41 PM | #19 | |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Re: Altrax PDS controller settings
Quote:
Sent from my SM-G930R4 using Tapatalk |
|
Tags |
scotty b |
|
|
Similar Threads | ||||
Thread | Forum | |||
Altrax Controller Help | Electric Club Car | |||
Altrax XCT Controller | Electric EZGO | |||
Altrax SPM500 controller map | Electric Club Car | |||
instaling an altrax controller | Electric Club Car | |||
Altrax Controller Recommendations | Electric EZGO |