drive clutch

pachanga90 · 02-19-2011, 10:28 PM

You can remove the cover in the cart if you don't mind layin under it.Remove the center-bolt and the cover screws,and you are done.

csason · 02-19-2011, 11:29 PM

I use a 3/4 " fine thread capscrew (bolt) about 2" long and two deepwell
sockets that will slide in easily.

The ezgo puller threads are that, and the sockets act as the 'pusher'.

Different pullers for different folks..

madoc1 · 02-20-2011, 05:43 AM

homemade puller (taped so they won't get lost)

bud light · 02-20-2011, 10:21 AM

Thanks for all of your.
I will work on it today.

.45ACP because shooting is silly.

csason · 02-20-2011, 05:30 PM

Quote:

Originally Posted by madoc1

homemade puller (taped so they won't get lost)

Ahh.. the old 'ground down' rebar trick...hmmm have to remember that one.

bud light · 02-20-2011, 08:45 PM

I have a 2006 work horse .I had to remove all the bolts and motor mounts and tilt the motor to remove the clutch. I found that who ever had it before I bought it must have drove in water. When I took it apart all the weights was rusted and would not move.
I cleaned moved and lubricate them for several hours. Long process. I got them to move freely then installed. Took me awhile but seems to be working well.

Thanks to everyone for your help.

02-19-2011, 10:28 PM	#11
pachanga90 I Refuse To Get Stuck!!! Join Date: Jun 2010 Location: Hilton,NY Posts: 5,427	Re: drive clutch You can remove the cover in the cart if you don't mind layin under it.Remove the center-bolt and the cover screws,and you are done.

02-19-2011, 11:29 PM	#12
csason Love my Big Block Join Date: Oct 2009 Location: Florida Posts: 1,553	Re: drive clutch I use a 3/4 " fine thread capscrew (bolt) about 2" long and two deepwell sockets that will slide in easily. The ezgo puller threads are that, and the sockets act as the 'pusher'. Different pullers for different folks..

02-20-2011, 10:21 AM	#14
bud light Gone Wild Join Date: Oct 2010 Location: Lawrenceburg Ky. Posts: 1,771	Re: drive clutch Thanks for all of your. I will work on it today. .45ACP because shooting is silly.

02-20-2011, 08:45 PM	#16
bud light Gone Wild Join Date: Oct 2010 Location: Lawrenceburg Ky. Posts: 1,771	Re: drive clutch I have a 2006 work horse .I had to remove all the bolts and motor mounts and tilt the motor to remove the clutch. I found that who ever had it before I bought it must have drove in water. When I took it apart all the weights was rusted and would not move. I cleaned moved and lubricate them for several hours. Long process. I got them to move freely then installed. Took me awhile but seems to be working well. Thanks to everyone for your help.

Similar Threads
Thread	Forum
Tips & Hints for installing Clutch Tuning Kit, Removal of Drive Clutch	Gas Club Car
WTB:780 Drive Clutch	Golf Carts and Parts
Drive Clutch	Gas Yamaha
Drive Clutch	Gas EZGO
GI Drive Clutch	Gas Yamaha

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum