|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-21-2011, 04:01 AM | #1 |
Not Yet Wild
Join Date: Aug 2008
Posts: 4
|
G16 Spider removal
Hi, I have a G16 clutch that needs new rollers and possibly weights. Problem is I cannot remove the spider. The clutch is removed and in my bench vise. I have been putting a lot of pressure on the spider with a three prong puller but it will not budge. I must be doing something really stupid.
Thanks for any help! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-21-2011, 05:28 AM | #2 |
Not Yet Wild
Join Date: Mar 2011
Location: goldsboro,n.c.
Posts: 46
|
Re: G16 Spider removal
it screws off to the left,most of the time i will heat with a small torch because it is assembled with locktite.
|
03-21-2011, 10:11 PM | #3 |
Not Yet Wild
Join Date: Aug 2008
Posts: 4
|
Re: G16 Spider removal
Thanks for the reply Mr. EZ. Your suggestion worked very well. I should have realized the spider was screwed on or at least searched for the info.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
G-16 Primary Clutch Spider Q | Gas Yamaha | |||
taking off spider assy. and the the starter pully spins but not the spider assy? Help | Gas Yamaha | |||
WTB G2 Primary Clutch Spider | Golf Carts and Parts | |||
spider removal help | Gas Yamaha | |||
Rear end spider gears | Electric EZGO |