|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-07-2016, 10:19 PM | #1 |
Not Yet Wild
Join Date: May 2016
Posts: 3
|
91 governor arm diagram
I have a 91 two cycle. I unscrewed the brass hex out of the top of the axle housing where the governor shaft exits. I dropped the shaft into the rear end but was able to fish it back to the top with a magnet. I don't know what position the shaft is supposed to be in. Every time I think its right, it binds when I tighten the hex bushing. I found one exploded view of the rear end on this forum. But there is not enough detail to show exactly how it goes. Does anyone have a diagram of the axle? Or any suggestions? Thanks.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
Tags |
rearend, transaxle |
|
|
Similar Threads | ||||
Thread | Forum | |||
Governor | Gas EZGO | |||
g16 governor | Gas Yamaha | |||
Governor | Gas EZGO | |||
governor | Gas EZGO | |||
Using a diagram to disable the governor on 2002 G16 | Gas Yamaha |