|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-12-2017, 12:45 PM | #11 |
Not Yet Wild
Join Date: Mar 2017
Location: Mentor, Ohio
Posts: 38
|
Re: Adjusting throttle cables
I believe I got it! You guys are great, thanks tons. It's a project for sure and I need all the advice I can get. Going to look **** good and hopefully run good when it's done.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-12-2017, 01:00 PM | #12 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
|
Re: Adjusting throttle cables
|
03-12-2017, 02:22 PM | #13 |
Gone Wild
Join Date: Sep 2010
Location: ontario
Posts: 182
|
Re: Adjusting throttle cables
Does your carb open all the way
|
03-12-2017, 02:57 PM | #14 |
Not Yet Wild
Join Date: Mar 2017
Location: Mentor, Ohio
Posts: 38
|
Re: Adjusting throttle cables
Yep and closes too.
|
03-12-2017, 06:43 PM | #15 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,433
|
Re: Adjusting throttle cables
Carb has to be shut all the way (or on the idle screw) when you start it, or you get hard starting and backfiring and a cart that takes off when you start it. So you have to leave slack to make it do nothing while starting....yet still get full throttle opening when its on the floor.
|
03-13-2017, 04:34 AM | #16 |
Not Yet Wild
Join Date: Mar 2017
Location: Mentor, Ohio
Posts: 38
|
Re: Adjusting throttle cables
I'm sure I will have to tweak it some but I also have plenty of play in both cables now also. Gonna replace the TCI also. Some harnesses... entire secondary... tweak the front end. As soon as I receive the new fuel lines, TCI, and a new battery it will be time to fire it up. Body has been painted a badda$$ pearl blue metalflake. Hopefullly all the engine internals are good to go. Thanks guys.
|
03-29-2018, 04:15 PM | #17 |
Gone Wild
Join Date: Dec 2010
Posts: 635
|
Re: Adjusting throttle cables
Good Info
|
03-31-2018, 08:17 AM | #18 |
Gone Wild
Join Date: May 2015
Location: Central Florida
Posts: 2,114
|
Re: Adjusting throttle cables
Don't touch the one from the pedal to the governor, I see that all the time here and see sooooo many broken accelerator cables because of it.
Adjust the governor to carb cable so that the carb starts to open at about 1 inch of travel of the accelerator pedal and your done. |
04-02-2018, 01:42 AM | #19 | |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Adjusting throttle cables
Quote:
|
|
11-05-2019, 06:56 AM | #20 |
Not Yet Wild
Join Date: Mar 2013
Posts: 6
|
Adjusting throttle cables
I have this 2003 Yamaha g22a that was brought to me. Guy said that cable #1 broke and he replaced it. Said it ran for a little bit but then stopped running. He brought it to me not running at all. Should the base nut on this cable be all the way back?
Sent from my iPhone using Tapatalk |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Need help adjusting shift cables | Gas EZGO | |||
adjusting shift cables on a 2000 ezgo workhorse | Gas EZGO | |||
adjusting throttle linkage | Gas EZGO | |||
adjusting TXT shift cables | Gas EZGO | |||
throttle and governor cables | Gas EZGO |