|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-17-2017, 01:29 PM | #1 |
Not Yet Wild
Join Date: Mar 2017
Location: Muskegon, MI
Posts: 5
|
Light switch wired to ignition
I have a gas 97 EZGO TXT. I have a 2 post light switch wired to the battery and was wondering if anyone has a suggestion to wire this to the ignition so some smo doesn't just walk by and turn on my lights.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-17-2017, 02:09 PM | #2 |
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,489
|
Re: Light switch wired to ignition
Does your key switch have only 2 posts?
If so, one side is hot all of the time. That side is connected to the fuse. Take the light wire from the battery, and connect it to the opposite side of the switch. Your lights will only be on when the key is on. Leave your toggle switch connected so you can control them. |
08-17-2017, 02:11 PM | #3 |
Not Yet Wild
Join Date: Mar 2017
Location: Muskegon, MI
Posts: 5
|
Re: Light switch wired to ignition
Ok, thank you.
|
Tags |
light switch, wiring |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
LED light bar wired to a house plug? | Electric Club Car | |||
PDS with factory light ignition switch ? | Electric EZGO | |||
Conversion ignition wired, but another issue now | Gas Columbia ParCar | |||
2003 TXT Dash - Ignition and Light Switch | Gas EZGO | |||
Ignition wired to two differnt locations on 1990 and 1993 DS Club Cars 36 V V-Gluide | Electric Club Car |