|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-14-2018, 06:54 PM | #1 |
Not Yet Wild
Join Date: Jun 2017
Posts: 71
|
Yamaha g9 body removing hrlp
Are there any manuals for removing and reinstalling a g9 body that also gives hardware specs
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-14-2018, 11:17 PM | #2 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,669
|
Re: Yamaha g9 body removing hrlp
Rear body is just 5 screws. 3 behind the seat and 2 under the rear storage may.
Front you remove the little L Brackets and there's a handful of 10mm bolts holding the rubber surround on the top.of the front cubby holes. Then underneath there's some.10mm nuts under the front if it's but the top is held in by a plastic holder which will likely break so you'll habe to hold them with some vice grips. Really, on a buggy this old the rear is super easy to remove. But for the front, if you're doing paint or whatever it os pro ably more work to remove than it is worth. I would probably recommend just masking it off and painting the front of it while still installed. Less work to take the time to mask everything off than it is to remove and fight brittle plastic, rusted bolts, etc. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Removing the body | Gas Club Car | |||
Removing TXT Body | Gas EZGO | |||
Removing body on a G8 | Gas Yamaha | |||
removing body? | Electric golf carts | |||
Removing Yamaha G-22 body, any tips? | Gas Yamaha |