|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
06-15-2018, 07:34 PM
|
#1 |
|
Not Yet Wild
Join Date: Jan 2016
Posts: 41
|
G1 engine swap to another frame
I pulled apart a G1 that was too far gone on the frame with rust. i have everything still and was wondering how hard would it really be to transfer it all over to another frame...the only thing is it would be an ezgo frame so nothing will end up lining up from the G1 parts.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-15-2018, 10:41 PM
|
#2 |
|
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: G1 engine swap to another frame
Anything is possible but this may be a tough one the 2 stroke ezgos sat "sideways" so muffler may be a issue if there enough room front to back to mount it
|
|
|
|
|
06-16-2018, 08:44 PM
|
#3 |
|
Gone Wild
 Join Date: Jan 2017
Location: venice
Posts: 1,807
|
Re: G1 engine swap to another frame
this was the issue I ran into with the 75 HD cart I had. It can be done but will require some fabrication. I belive the old ez go used the same style of differential. If you have a welder and the will there is a way
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Frame swap questions | Gas EZGO | |||
| Electric body swap onto gas cart frame | Electric EZGO | |||
| 93 ezgo marathon frame swap | Gas EZGO | |||
| Frame swap possible? | Electric EZGO | |||
| Is it possibe to swap a G1 body onto a G8 frame? | Gas Yamaha | |||
Linear Mode
