|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-05-2018, 03:59 PM | #1 |
Gone Wild
Join Date: Nov 2009
Location: mi
Posts: 766
|
G8 axle issue
Well i pulled a trans axle out of a g8 for rebuild. I diasasembled the entire axle replaced every bearing and cleaned it out. Last but not least the outer axle bearings were shot. I tried pressing off would not come off i had to cut each one and chisiel with a hammer to split them. Suprise they fit on the hub side and the factory welds the hubs on know woder would not press off. Any input would be great looking at chucking it up in the lathe cutting weld then pressing new bearing on and run an indacator on it while i weld it back on.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-05-2018, 05:25 PM | #2 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: G8 axle issue
same as a G1...http://www.buggiesgonewild.com/gas-y...placement.html
|
10-06-2018, 06:53 AM | #3 |
Gone Wild
Join Date: Nov 2009
Location: mi
Posts: 766
|
Re: G8 axle issue
Thanks small block! Lilttle concerned customer has 18hp vanny in the cart. After i have ot welded again concerned with the temper of axle being removed? I know they did it omce with no issues but now its being heated twice. Might not give him an opt. Other than purchasing new axles. Hate to do all this work and find out he twisted a hub off. 26 mud tires lol. I imagime thats why the bearings met there demise.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Yamaha g16 rear axle issue | Gas Yamaha | |||
95 ezgo txt rear axle issue | Gas EZGO | |||
Jakes front axle issue | Gas EZGO | |||
1990 Ezgo secondary clutch or rear axle issue | Gas EZGO | |||
brakes, axle and lug nut issue | Electric Club Car |