|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-19-2016, 06:29 PM | #1 |
Gone Wild
Join Date: May 2016
Location: Central Alabama
Posts: 1,049
|
Frame/Suspension Compatibility 84 model with 92 model TXT
Does anyone know if the rear suspension and engine unit from an 84 ezgo TXT (robbins 295 engine) will be a direct fit to a 92 or 93 ezgo txt frame/body?
On both models, the frame connects to the rear suspension in two places with a bolt and bushing on each side that allows the rear suspension to pivot up and down. I have 84 TXT with badly rusted front frame and have found both a 92 and 93 body and chassis for a very good price. However, they are a 200 mile drive away drive and I wanted to be sure they are a direct fit before I make the trip. I want to be able to disconnect the two pivot bolts and shocks and coil springs and remove the engine and suspension and bolt that unit to another frame/body without a lot of re-engineering . |
|
|
Similar Threads | ||||
Thread | Forum | |||
Identify this suspension model | Lifted Golf Carts | |||
Gas / Electric suspension compatibility | Gas Club Car | |||
G2 - Understanding Frame/Suspension Bushings | Gas Yamaha | |||
B&S model ID help | Big Block Talk! | |||
precedent model vs ds model | Gas Club Car |