Victron BMV-712 and 48v Evolution

[trush]

Hey gang -

I have a 48v Evolution Lithium battery (model L48110) on my Club Car. I just installed a Victron BMV-712 in order to have better monitoring of the SoC.

I'm not having any luck reaching Evolution for help on the proper configuration parameters and thought I'd reach out to this group and see if I could get some help on the proper parameters. Here's what I currently have configured:

Battery capacity: 110ah
Charged voltage: 55.6v
Discharge floor: 0
Tail current: 4.00%
Charged detection time: 3m
Peukert exponent: 1.01
Charge efficiency factor: 99%
Current threshold: 0.10A

Does anybody have any recommended changed to the above parameters?

TIA