|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-27-2016, 01:14 PM | #1 |
Not Yet Wild
Join Date: Jun 2016
Posts: 11
|
Need help!!! Ezgo txt 2001 slow motion
Recently I picked up a 2001 Ezgo txt series cart that didn't run.
Upon getting it home and charged I got it to move but with a shutter at take off and slow motion What I have done so far : Replaced the battery pack Replaced the wires with 4 gauge wires Installed new alltrax 500 amp sr controller Installed new heavy duty solenoid Currently the cart still shutters at take off and is very slow . I have checked the ITS with a DVM and it shows 6volts when the solenoid clicks down to 4 volts at full throttle. I'm not sure if this is proper voltage for the SR Alltrax. Alltrax program shows the throttle response when I press the pedal . I'm thinking the problem must be with the stock motor or Forward reverse switch |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-27-2016, 03:10 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Need help!!! Ezgo txt 2001 slow motion
I'm inclined to agree. But it could be a bad cable end too. Basically something stopping the high amp flow.
|
07-27-2016, 04:17 PM | #3 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Need help!!! Ezgo txt 2001 slow motion
Quote:
2. I'm not sure for a SR, but for all the other Alltrax controllers the ITS voltage is 10V with pedal pushed just far enough for solenoid to click and 6V pedal down. Maybe Scotty knows, or a call Alltrax is suggested. 3. Does the program show the throttle going to 100% when on the floor? (Also, LED on controller should go to yellow) |
|
07-27-2016, 04:37 PM | #4 |
Not Yet Wild
Join Date: Jun 2016
Posts: 11
|
Re: Need help!!! Ezgo txt 2001 slow motion
Is there a way to test the forward reverse switch or bypass it to confirm that's the problem ?
|
07-27-2016, 04:43 PM | #5 | |
Not Yet Wild
Join Date: Jun 2016
Posts: 11
|
Re: Need help!!! Ezgo txt 2001 slow motion
Quote:
3. The program does show the throttle going to 100% and the yellow light comes on |
|
07-28-2016, 07:42 AM | #6 | ||
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Need help!!! Ezgo txt 2001 slow motion
Quote:
Bypass - After disconnecting battery pack from controller, label and remove the four high current cables from F/R assembly and bolt A to B and C to D. Reconnect battery pack to controller, select either direction with the direction selector lever and the cart should go forward when pedal is pushed. Quote:
3. I'd still confirm what the ITS voltage ought to be with Alltrax or at least an Alltrax dealer. Last edited by JohnnieB; 07-28-2016 at 07:44 AM.. Reason: added attachments |
||
07-28-2016, 07:53 AM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Need help!!! Ezgo txt 2001 slow motion
I'd still confirm what the ITS voltage ought to be with Alltrax or at least an Alltrax dealer.
I believe he has confirmed this by checking the reading (10v-6v) and checking the control is registering 0-100% But in the name of science I will email my ever patient Alltrax tech rep. |
07-28-2016, 08:23 AM | #8 | ||
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Need help!!! Ezgo txt 2001 slow motion
Quote:
Quote:
The fact that the auto-calibrate of the SR compensates for for an ITS voltage that far out of range is amazing, if it is out of range, but I'm not all that familiar with the SR and don't positively know what the ITS voltage for a SR is supposed to be. I don't think is would be different than it is for their other controllers, but there is a possibility, so I questioned it. Granted, he is getting 100% throttle indications, so he ought to be getting full speed, however I suspect the questionable ITS voltage may be a symptom of an internal controller problem that keeps the PWM output from going to 100% duty-cycle. Of course, it could be motor or cable or battery issues. |
||
07-28-2016, 08:37 AM | #9 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Need help!!! Ezgo txt 2001 slow motion
I see - I guess I am busted for speed reading again
Not to worry I have sent a request for the information needed. |
07-28-2016, 09:32 AM | #10 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Need help!!! Ezgo txt 2001 slow motion
|
|
|
Similar Threads | ||||
Thread | Forum | |||
back and forth between fast and slow motion | Electric EZGO | |||
94 CC DS in slow motion | Electric Club Car | |||
2001 TXT very slow and won't go far | Electric EZGO | |||
2001 Ezgo running slow | Electric EZGO | |||
2001 EZGO runs slow | Electric EZGO |