Tomberlin Emerge: lights, odometer, all dead

[pokesgolfcarts]

Originally Posted by Golf cart guy

Ive worked on hundreds and never seen this issue. Hummmmm

I've worked on hundreds too and see it a few times a year, something shorts internally on the wiper motor, leaking voltage to the frame and causing various issues.

[laverma]

Can somebody please describe the wiring of the DC changeover and DC Converter? Guy changing my battery pulled some wires loose. Currently DC Converter black is on the negative post of the battery, the red is pulled loose. I've attached a picture. Assumed (and it appears) the red from the converter should attach to the loose yellow, but this is not providing 12v to any accessories when I tried that. Also curious between which posts on the Changeover should I have continuity (and does everything have to be disconnected to test)?

[Cactus Man]

Originally Posted by Golf cart guy

The voltage reducer is behind the batteries on the driver side. Common issue is the connected gets pulled. Because the car runs, almost guarantee that's where your problem is. There is a fuse there but never seen one blow yet. Connector is weak link. make sure you turn key on and wiggle the wires, youll find it then

I was wondering if someone would be able to take a picture of this connection for me (see attachment). I had a battery fail an the acid overflowed onto the connection destroying the plastic. Now I have 5 loose wires and want to make sure I connect them together correctly. Thanks.
Dennie20171010_150152.jpg

[pokesgolfcarts]

Originally Posted by Cactus Man

I was wondering if someone would be able to take a picture of this connection for me (see attachment). I had a battery fail an the acid overflowed onto the connection destroying the plastic. Now I have 5 loose wires and want to make sure I connect them together correctly. Thanks.
DennieAttachment 160563

They should match up color for color

[Golf cart guy]

Originally Posted by Cactus Man

I was wondering if someone would be able to take a picture of this connection for me (see attachment). I had a battery fail an the acid overflowed onto the connection destroying the plastic. Now I have 5 loose wires and want to make sure I connect them together correctly. Thanks.
DennieAttachment 160563

Seen that a lot. Take your time with new connectors

[Emeryvb]

I have no speed or OD, is that just a faulty speed sensor on the motor?