lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 06-26-2017, 07:48 AM   #1
mdjackson24
Not Yet Wild
 
Join Date: Jun 2017
Posts: 6
Default 2014 RXV with Ezgo lift - rear wheel spacers

Does anyone know what size spacers would be required for the back wheels to match the front? I would like to have an even stance.

2014 RXV with a standard Ezgo branded spindle lift
mdjackson24 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 07-01-2017, 01:48 PM   #2
kirksingleton
Getting Wild
 
Join Date: Jun 2014
Posts: 100
Default Re: 2014 RXV with Ezgo lift - rear wheel spacers

I have a '14 rev with the ego lift. I had to add 1" spacers on the front because of rubbing issues. I ended up putting them on all 4 corners and it looks good!
kirksingleton is offline   Reply With Quote
Old 07-02-2017, 06:03 AM   #3
jneubig
Gone Wild
E-Z-GO
 
Join Date: Aug 2012
Location: Houma, Louisiana
Posts: 950
Default Re: 2014 RXV with Ezgo lift - rear wheel spacers

I used 1.5" on my RXV with the Jake's spindle lift and it was very close to being even on all 4 corners.
jneubig is offline   Reply With Quote
Old 07-02-2017, 09:04 AM   #4
ARKSoft84
Gone Wild
 
ARKSoft84's Avatar
E-Z-GO
 
Join Date: Jun 2017
Location: NC
Posts: 368
Default Re: 2014 RXV with Ezgo lift - rear wheel spacers

Just measure from inside to inside of the tires in the front, then do same on rear. I saw a post on here that recommended using an adjustable shower curtain rod as a measuring stick for this task.

Adjust the shower curtain rod out to where it touches tire to tire in the front then measure the rod, then tire to tire in the back and measure again. This would also work to help line out the front end of the alignment was bad.
ARKSoft84 is offline   Reply With Quote
Old 07-02-2017, 10:21 AM   #5
Raystar57
Gone Wild
 
Raystar57's Avatar
Club Car
 
Join Date: Feb 2017
Location: Richmond, TX
Posts: 1,026
Default Re: 2014 RXV with Ezgo lift - rear wheel spacers

Quote:
Originally Posted by ARKSoft84 View Post
Just measure from inside to inside of the tires in the front, then do same on rear. I saw a post on here that recommended using an adjustable shower curtain rod as a measuring stick for this task.

Adjust the shower curtain rod out to where it touches tire to tire in the front then measure the rod, then tire to tire in the back and measure again. This would also work to help line out the front end of the alignment was bad.
Measuring with a flimsy tape measure is a pain!
Raystar57 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Jakes 6" spindle lift and rear wheel spacers Electric EZGO
Lift kit, wheel spacers, 8" stock rims Lifted Golf Carts
Rear Wheel Spacers? +'s, -'s? issues?'s Electric EZGO
wheel spacers-centered wheels-3in. lift ezgo Lifted Golf Carts
Lift is on the way, advice on wheel spacers...? Lifted Golf Carts


All times are GMT -5. The time now is 03:55 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.