09-13-2017, 01:07 PM | #1 |
Not Yet Wild
Join Date: Sep 2017
Location: port orchard,washington
Posts: 1
|
drive clutch spring
I installed 200 rpm spring in drive clutch. worked good , shift gears at idle,but i noticed a click noise when i shut off engine. it is the clutch snapping apart about a quarter of a inch at shutdown. this completely disengages the drive belt . the clutch and internals were in as new condition when disassembled.I did not disassemble any parts of clutch,just what i needed too for spring replacement. Is this normal with heavier spring is installed ?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Replace Drive Clutch Spring Without Removing Clutch? | Gas EZGO | |||
Drive clutch spring for EZGO 91 and up | Gas EZGO | |||
Drive clutch spring | Gas Yamaha | |||
Can I put a different spring in the Drive clutch? | Gas EZGO | |||
03 TXT-Drive Clutch Spring Upgrade | Gas EZGO |