|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
11-03-2017, 09:28 AM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2017
Posts: 17
|
FN1 speed controller
Can someone tell me if the FN1 speed controller for the alltrax sr 48400 increases the actual speed of your cart or just allows you to adjust the speed your cart already has?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-03-2017, 09:36 AM
|
#2 |
|
Gone Wild
 Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: FN1 speed controller
It only allows You to select the speed within the predefined range you configure in the controller software.
|
|
|
|
|
11-03-2017, 10:32 AM
|
#3 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: FN1 speed controller
In other words - it will not increase the max speed you see without the FN1 installed.
|
|
|
|
|
11-03-2017, 02:46 PM
|
#4 |
|
Not Yet Wild
Join Date: Aug 2017
Posts: 17
|
Re: FN1 speed controller
Thanks for the reply. Can a speed chip be used on a alltrax sr 48400.
I have upgraded everything possible except the motor and still only get 12 mph. |
|
|
|
|
11-03-2017, 04:15 PM
|
#5 | |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: FN1 speed controller
Quote:
Basically in a series cart, more amperage gives you more torque and more voltage gives you more torque and speed. If you have the 48v capable controller and solenoid, just add voltage. |
|
|
|
|
|
11-03-2017, 06:04 PM
|
#6 |
|
Not Yet Wild
Join Date: Aug 2017
Posts: 17
|
Re: FN1 speed controller
Adding voltage I would have to upgrade to a 48 volt motor, correct? By the way all of the upgrades on my cart came from you Scotty b.
|
|
|
|
|
11-03-2017, 11:19 PM
|
#7 | |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: FN1 speed controller
Quote:
|
|
|
|
|
|
11-04-2017, 06:06 AM
|
#8 |
|
Gone Wild
Join Date: Nov 2011
Location: S.E. Mi.
Posts: 531
|
Re: FN1 speed controller
Just FYI the cart in my signature runs about 18 mph but the tires are low pressure knobby style, which supposedly slow it down as opposed to a high pressure style tire.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| a DC motor controller ( electronic speed controller) | Golf Carts and Parts | |||
| MCOR? Speed Sensor? Controller? Cart Runs at half speed. Advice, please. | Electric Club Car | |||
| 1204 controller, half-speed forward full speed reverse | Electric EZGO | |||
| Junk speed controller or solenoid/resistors issue? no "0 speed" instant ~1/2 throttle | Columbia ParCar | |||
| Speed Controller | Electric Club Car | |||
Linear Mode
