|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-27-2020, 11:51 AM | #1 |
Not Yet Wild
Join Date: Apr 2019
Posts: 13
|
Heavy Duty F/R Switch Diagram?
I am having issues with a 36v EzGo TXT and want to rule out the F/R switch.
If you made the switch a clock face (studs rear facing) what would each wire go to? A1/A2/S1/S2 12 3 (passenger) 6 9 (driver side) Thanks in advance!! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-27-2020, 02:49 PM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Heavy Duty F/R Switch Diagram?
Here is a schematic for a series drive cart.
The F/R terminals are shown from behind as seen if you where facing forward. Note: Not all motor studs connect to F/R switch and there are more than one way to wire a F/R switch that works. |
04-27-2020, 02:49 PM | #3 |
Getting Wild
Join Date: Mar 2020
Posts: 78
|
Re: Heavy Duty F/R Switch Diagram?
See the 2 wiring diagrams in this thread. http://www.buggiesgonewild.com/showthread.php?t=162513 If it's stock, then it should be the first diagram (Rev A or B) not the Rev C diagram.
edit - JohnnyB has the better diagram |
|
|
Similar Threads | ||||
Thread | Forum | |||
Heavy Duty F/R Switch on PDS? | Electric EZGO | |||
heavy duty FR switch | Electric Yamaha | |||
heavy duty f-r switch | Electric Club Car | |||
Heavy duty F/R switch | Electric EZGO | |||
Heavy duty f/r switch | Electric Club Car |