11-27-2020, 06:38 PM | #1 |
Not Yet Wild
Join Date: Jun 2020
Posts: 17
|
Axle snap ring
Okay guys I have an 09 club car precedent. I have been searching for the snap ring all afternoon and I do not see it. Could it just not be there? Does anybody have a picture not a diagram of where it really should be. I have takin it all apart and do not see it. Any help is appreciated!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-27-2020, 07:48 PM | #2 |
Gone Wild
Join Date: Nov 2020
Posts: 215
|
Re: Axle snap ring
if its like the older ones its behind the brake shoes inside the axle tube.
It retains the bearing |
11-27-2020, 08:14 PM | #3 |
Not Yet Wild
Join Date: Jun 2020
Posts: 17
|
Re: Axle snap ring
I took the brakes off but don’t see it
|
11-27-2020, 09:20 PM | #4 |
Gone Wild
Join Date: Nov 2020
Posts: 215
|
Re: Axle snap ring
yours may or may not have a hole in the axle flange.
look thru the hole in one pictured and see the ears of snap ring and the 2 holes the snap ring pliers go in to release it. You will need special 90* pliers like the ones on floor of pic. The KDs are the stamped metal ones and are too cheap and flimsy,use the better heavy duty ones shown on left. |
11-28-2020, 06:57 AM | #5 |
Gone Wild
Join Date: Sep 2016
Location: Titusville, FL...Space Coast
Posts: 591
|
Re: Axle snap ring
|
11-28-2020, 08:14 AM | #6 |
Not Yet Wild
Join Date: Jun 2020
Posts: 17
|
Re: Axle snap ring
I have watched that video like 20 times I don’t see the snap ring lol
|
11-28-2020, 08:15 AM | #7 | |
Not Yet Wild
Join Date: Jun 2020
Posts: 17
|
Re: Axle snap ring
Quote:
|
|
11-28-2020, 11:25 AM | #8 |
Not Yet Wild
Join Date: Jun 2020
Posts: 17
|
Re: Axle snap ring
Here they are
|
11-28-2020, 04:14 PM | #9 |
Gone Wild
Join Date: Nov 2020
Posts: 215
|
Re: Axle snap ring
you dont have a snap ring on that model
the axle and bearing is retained by the plate with 4 bolts that you have already removed. if you dont have the proper slide hammer with the adapter that goes on axle studs then use the old timers trick and put the brake drum on backwards,screw the lugnuts on backwards for at least 3 threads and use the brake drum as a slide hammer. It should pop out and get stinky rear end lube all over everything(put the axle on an incline to keep lube from coming out. |
|
|
Similar Threads | ||||
Thread | Forum | |||
1998 Rear Axle Snap Ring | Gas Club Car | |||
Snap ring? | Big Block Talk! | |||
Removing the rear axle snap ring? | Gas Club Car | |||
need snap ring pliers for 97 ds rear axle | Electric Club Car | |||
Rear Axle Snap Ring | Electric Club Car |