|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
12-29-2020, 01:25 PM
|
#1 |
|
Not Yet Wild
Join Date: Dec 2020
Posts: 10
|
2000 TXT accelerator cable
What type of connector is at the accelerator cable end that connects to governor? My end has a round loop that fits on rod but don't know how keep connector on rod. Thanks, Tom
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-29-2020, 02:18 PM
|
#2 |
|
Gone Wild
Join Date: Jul 2020
Location: NC
Posts: 773
|
Re: 2000 TXT accelerator cable
I think you are going to have to add a photo to better show what you have so we can better give you support.
|
|
|
|
|
12-29-2020, 03:05 PM
|
#3 | |
|
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,215
|
Re: 2000 TXT accelerator cable
Quote:
 |
|
|
|
|
|
12-29-2020, 05:53 PM
|
#4 |
|
Not Yet Wild
Join Date: Dec 2020
Posts: 10
|
Re: 2000 TXT accelerator cable
Yes it does. Wish I could draw on your drawing. The connection I'm talking about is end of cable that connects to right angle bend on rod thru spring. Thanks
|
|
|
|
|
12-29-2020, 08:00 PM
|
#5 |
|
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,215
|
Re: 2000 TXT accelerator cable
I think you might be talking about the cable itself ?
Is the part you need number 1 on my picture or 2 ? or maybe 3 ? |
|
|
|
|
12-29-2020, 08:11 PM
|
#6 |
|
Not Yet Wild
Join Date: Dec 2020
Posts: 10
|
Re: 2000 TXT accelerator cable
What holds #2 unto #1?
|
|
|
|
|
12-29-2020, 08:15 PM
|
#7 |
|
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,215
|
Re: 2000 TXT accelerator cable
I think it is called a push nut. 3/16th. I have made something that would work. It don't take much to hold it on.
. Home Depot probably has something that would hold it and in my case I just find something in the shop that will work. I am showing the Part Number 12064G3 in my manual. Google it and you will see what it looks like |
|
|
|
|
12-29-2020, 08:26 PM
|
#8 |
|
Not Yet Wild
Join Date: Dec 2020
Posts: 10
|
Re: 2000 TXT accelerator cable
That's what I needed to hear. I got some push nuts and locking collars at store today and going to install tomorrow. Just wondered if that was enough to hold cable on rod. Thanks for your trouble. Tom
|
|
|
|
|
12-29-2020, 08:28 PM
|
#9 | |
|
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,215
|
Re: 2000 TXT accelerator cable
Quote:
 |
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Accelerator cable | Gas EZGO | |||
| Accelerator Cable | Gas Club Car | |||
| G16 Accelerator Cable Install | Gas Yamaha | |||
| Accelerator Cable | Gas EZGO | |||
| 1991 Par Car Accelerator cable | Gas Columbia ParCar | |||
Linear Mode
