|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-09-2023, 03:47 PM | #1 |
Not Yet Wild
Join Date: Mar 2017
Posts: 8
|
New Rxv Motor Brake Won’t Unlock
Rxv brake locked up in town. I ordered a new motor brake because I’ve had issues with it in the past and thought that would fix my problem. I’ve removed the old brake and connected the new brake but haven’t mounted it on the motor. However, when I switch the cart on in tow mode, the new brake will unlock for a second and then locks up again. The batteries are only a few months old and I have tried pulling the pedals toward me. I also cleaned the plug under the cup holder to no avail. The brake does unlock completely when the procedure under the tow/run switch is performed. Thinking it could be a solenoid issue? Any help would be appreciated
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-09-2023, 03:53 PM | #2 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,238
|
Re: New Rxv Motor Brake Won’t Unlock
Mount it on the motor and see if you still have a problem.
|
05-09-2023, 03:56 PM | #3 |
Not Yet Wild
Join Date: Mar 2017
Posts: 8
|
Re: New Rxv Motor Brake Won’t Unlock
It just seems odd to me since I’ve replaced the brake before in the past. Usually I will turn the cart on in tow mode and that unlocks the brake so I can align it with the motor lug. In order to attach it to the motor now I would have to use the procedure under the tow/run switch in order to unlock the brake so it can be aligned. Cart has the Curtis controller fyi
|
05-09-2023, 04:10 PM | #4 |
Gone Wild
Join Date: Feb 2016
Posts: 229
|
Re: New Rxv Motor Brake Won’t Unlock
The solenoid is bad.
|
05-09-2023, 04:11 PM | #5 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: New Rxv Motor Brake Won’t Unlock
If it is not on the motor then the startup procedure will fail. Put it on the motor shaft and just roll the cart until the screw holes line up.
|
05-09-2023, 04:13 PM | #6 |
Not Yet Wild
Join Date: Mar 2017
Posts: 8
|
Re: New Rxv Motor Brake Won’t Unlock
That’s what I was thinking. Cart has the TROMBETTA 36V 684-3641-012-26 but I only see the TROMBETTA 684-3641-012-28 for sale online. Would that be an acceptable replacement with no changes to the controller?
|
05-09-2023, 04:16 PM | #7 |
Not Yet Wild
Join Date: Mar 2017
Posts: 8
|
Re: New Rxv Motor Brake Won’t Unlock
Does it still perform the startup test in tow mode. When It is in tow there is no visible rocking from the motor lug like it does in run mode. The problem with mounting the brake on the motor is that the brake disc in the actual brake is not centered and needs to be energized to be centered. When I turn the cart on I can hear the solenoid click on but then it quickly clicks back off
|
05-09-2023, 04:19 PM | #8 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: New Rxv Motor Brake Won’t Unlock
28 is just a newer version. Just make sure you get the same voltage coil as what you have now. Here is a link to the replacement for what you have
https://www.countrycat.com/e-z-go-cu...16-rxv-48-volt |
05-09-2023, 04:23 PM | #9 |
Not Yet Wild
Join Date: Mar 2017
Posts: 8
|
Re: New Rxv Motor Brake Won’t Unlock
Appreciate the help. Will update
|
05-09-2023, 05:03 PM | #10 |
Gone Wild
Join Date: Sep 2020
Location: Germany
Posts: 2,000
|
Re: New Rxv Motor Brake Won’t Unlock
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Motor Brake Locked - Won't Unlock | Electric EZGO | |||
Rxv will not move, beep, or unlock brake. | Electric EZGO | |||
2003 G22 unlock? | Electric Yamaha | |||
Speed control unlock | Electric EZGO | |||
Unlock Club car 1989 | Gas EZGO |