|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-08-2014, 10:22 PM | #1 |
Not Yet Wild
Join Date: Jul 2014
Location: Niceville, FL
Posts: 1
|
Forward Reverse Switch mounting plate
I have a 1996 Yamaha electric golf cart that has had the Forward Reverse switch break, the metal part of the shaft connecting to the plate literally broke off. I purchased the cart used and this is my first golf cart so I'm still learning the in's and out's of how to fix/maintain it. I have found where I can order the replacement part for the switch but I also need the mounting plate along with the bolts that goes through the shell to where the handle is. How do I find this plate and bolts to order them? Whoever replaced the switch last time seems to have used the incorrect threading with the bolts and have caused one of the bolts to break off in the plate and the other holes do not allow the bolts to fasten down properly to secure the switch, which probably explains why it broke. Thanks in advance for your help.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-09-2014, 02:14 AM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Forward Reverse Switch mounting plate
I dont know where to get one, but those bolts are metric. M6 size 1.0 mm thread pitch. Not 1/4"-20.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
forward/reverse switch change to toggle switch | Electric Club Car | |||
Goes in reverse when switch is in forward. does nothing with swicth in reverse | Electric EZGO | |||
97 TXT Forward Reverse Switch | Electric EZGO | |||
Forward Reverse switch limit switch | Electric Club Car | |||
Forward Reverse switch melted on forward...have question about replacement part | Electric Club Car |