1995 2 wire v-glide wiring diagram

[sfourtyfive]

Trying to get my brothers 95cc going again.

Sn# A9502

Done lots of research and gather that this is an oddball year especially since it was 2nd week of production. Black Curtis controller & 2 wire vglide.

Symptoms:
Cart was running fine one second, wouldn't move the next. Actually, it would just budge in fwd or rev.

Checks:
Newer batts, load test good, pack at 50.3
Visual of wiring ok.
Solenoid clicks
Reset obc

I'm pretty well versed in carts, but only really get into ezgos, after checking it all over it looked like a bad controller to me, and his carts always been a dog, so I picked him up an alltrax SPM 300A controller.

Issue I have now is I thought I wired it up correctly but it won't run. (Won't even budge like it did with the old controller, black Curtis)

I'm getting 1 green LED flashing on the controller (0-5k). On the alltrax software
I'm showing a "precharge failure".

More research today and I'm thinking my issue is how I hooked it up, the diagram in the manual was for a 5 wire.

Does anyone have a wiring diagram for the 2wire 95s?

Or an idea of what i did wrong?

Thanks.

resistor on Solenoid?

[Sergio]

Here is the diagram: http://www.buggiesgonewild.com/attac...tep_wiring.jpg

Is the precharge resistor installed?

found this diagram

[sfourtyfive]

Sergio's diagram is exactly what I was looking for. Now I've just got to figure out how to get that hooked up to the Alltrax SPM. ;o)

Thanks.

[scottyb]

Originally Posted by sfourtyfive

Sergio's diagram is exactly what I was looking for. Now I've just got to figure out how to get that hooked up to the Alltrax SPM. ;o)

Thanks.

Use the diagram provided in the SPM manual
Be sure '0-5k 2 wire' throttle option is selected. It is a plug and play application.

[sfourtyfive]

I'm still fighting with this cart ;o)

Got everything hooked up correctly and it will only run intermittently. Traced the issue back to the v-glide, removed and inspected and found the wiper arm is cracked, wires rubbed raw, and over all in pretty bad shape.

I'd like to replace it, but can't find a part# for it, because this is an early '95, I want to make sure I get the correct one. Does anyone know the correct part #?

Thanks.

[Stevegrmich]

Originally Posted by sfourtyfive

I'm still fighting with this cart ;o)

Got everything hooked up correctly and it will only run intermittently. Traced the issue back to the v-glide, removed and inspected and found the wiper arm is cracked, wires rubbed raw, and over all in pretty bad shape.

I'd like to replace it, but can't find a part# for it, because this is an early '95, I want to make sure I get the correct one. Does anyone know the correct part #?

Thanks.

Part # for complete assembly is 1016012 . . .