|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-02-2010, 02:47 PM | #1 |
Not Yet Wild
Join Date: Feb 2010
Posts: 64
|
Question about wiring from forward/reverse switch
I am running new 4 gauge wires from my forward/rev. switch to my motor. The wiring diagram that I am looking at is a little light. Can I clarify a few things with somebody that knows?
1997 EZGO TXT non-dcs series cart. On my forward/rev. switch: C goes to A2 on the motor B goes to S2 on the motor D goes to S1 on the motor A goes to?????? (not sure about this one) From the controller, M goes to A1 on motor? Is M on the controller the only one that goes straight to the motor? Thanks. |
|
|
Similar Threads | ||||
Thread | Forum | |||
forward/reverse switch change to toggle switch | Electric Club Car | |||
Do I need an HD Forward and Reverse Switch? | Electric Club Car | |||
forward/reverse switch wiring | Electric Club Car | |||
Wiring 36V Forward Reverse Switch 95CC | Electric Club Car | |||
Forward Reverse switch melted on forward...have question about replacement part | Electric Club Car |