New Shocks for my EZGO TXT?

[StratoGeezer]

Hey Guys,

I'm busy upgrading my (former) fleet TXT EZGO cart. Most of the work is done - it's lifted, new motor, new controller, etc....

Anyway - while on a routine visit under the cart - I notice the shocks appear to be definitely original - so would you guys recommend changing them out - or am I just making myself feel better by throwing more new parts at this thing? I believe there are 2 shocks in the front - one in the back.

Are there some upgraded shocks I should consider? I'm assuming the leaf springs are still ok.

What do you think? Thanks!

[gornoman]

1 in the back? A TXT uses 4 shocks, and they are all the same part number. They are different than automotive shocks, more like dampers than shocks. If the old ones move in-out very freely then they are shot. I always like to see HD springs on a lifted cart to help combat the leaning. And yes, it will make the ride firmer.

[StratoGeezer]

Gornoman,

I love your "Not this *&^%" again graphic - that is classic.

And low and behold - there certainly are four of them (shocks) on my TXT (duh on my part).

So the HD springs will keep the cart from being "tippy" (leaning) you say? I see they are not that expensive - but how easy/hard would you say the would be to install. Looks like 2 bolts...but sometimes looks can be deceiving....

Thanks!

[cuzky]

Nothing tricky ,You will need a jack and a jack stand do one side at a time. Take wheel off you will see more bolts at the rubber saddle and 1 at each end of spring. Spring will weigh maby about 20 lbs for the 4 leaf About an hour of time . GOOD LUCK

[gornoman]

Originally Posted by StratoGeezer

Gornoman,

I love your "Not this *&^%" again graphic - that is classic.

It's actually a pretty good likeness of me, right down to the suit and tie! LOL!

Four wheels, four shocks, four springs, forgot!