01-09-2007, 03:01 PM | #1 |
Gone Wild
Join Date: Dec 2006
Location: Pittsburgh, PA
Posts: 379
|
dump bed
well its about time i ripped that wodden understructure off for the dump bed and built a real one out of steel....first real job that will have to be strong is done...came out god...works nicely...
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-09-2007, 03:02 PM | #2 |
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,858
|
I can't see the pic's from here at work but I bet it looks great!!!
|
01-09-2007, 03:09 PM | #3 |
Gone Wild
Join Date: Dec 2006
Location: Pittsburgh, PA
Posts: 379
|
i wish i could make them bigger but they are from my camera phone and they wont resize
|
01-09-2007, 03:11 PM | #4 |
Gone Wild
Join Date: Dec 2006
Posts: 489
|
Looking good! Kinda hard to see (small pics) but from what I can see, you welds look strong.
|
01-09-2007, 03:37 PM | #5 |
Gone Wild
Join Date: Dec 2006
Location: Pittsburgh, PA
Posts: 379
|
crappy pic but u get the point...the welds r gettin much cleaner....
|
01-09-2007, 03:53 PM | #6 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Nice job!!! In the last pic the weld looks great
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
01-09-2007, 04:37 PM | #7 |
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,858
|
Yep, looking really good Gary!!
|
01-15-2007, 04:12 PM | #8 |
Gone Wild
Join Date: Dec 2006
Location: Pittsburgh, PA
Posts: 379
|
ok here are the good pics of the bed support and the welds..enjoy..
|
01-15-2007, 04:50 PM | #9 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Nice job!!!! What is your tail pipe blowing on?? Looks like it's burning something.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
01-15-2007, 05:33 PM | #10 |
Gone Wild
Join Date: Dec 2006
Location: Pittsburgh, PA
Posts: 379
|
piece of wood lined with aluminum...its not exatly parallel with the wood like it looks in the pic and i put a heat test on it after running for a few hours and it was only at like 150 degreese.....so no fire hazard there...its gonna come off soon....
|