![]() |
|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
![]() ![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Not Yet Wild
Join Date: May 2015
Posts: 1
|
![]() So, I started looking for a starter belt because my newly purchased used cart (2009 Yamaha) has one that is stretched out. After some googling I see the belt is either 1/2 x 35.5 or 1/2 x 36 depending on which website you believe. I want to pick one up today for the weekend and am wondering if there is any reason not to just go to tractor supply and buy a standard (or even kevlar) vbelt to replace it with.
Has anyone had any issues not using the oem belt? Any reason not to use kevlar? Am I overthinking this? Thanks in advance. |
![]() |
![]() |
![]() |
#2 |
VC 460 CLONE GONE WILD
![]() ![]() Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 11,065
|
![]() Didn't know the trick when I had the stock engine but with the VC 460 swap I changed to a cogged version of the v belt on my G14. Also changed the club cars I help maintain likewise.
|
![]() |
![]() |
![]() |
#3 |
Gone Wild
![]() ![]() Join Date: Dec 2009
Location: Aiken, SC
Posts: 14,493
|
![]() I usually use OEM but have used 35 x 1/2 on my ezgo with no issues.
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
Severe Duty Belt or Standard belt ??? | Gas EZGO | |||
?? How To: Change the Drive Belt & Starter Belt | Gas EZGO | |||
drive belt and starter belt | Gas EZGO | |||
replacing alternator/starter belt with shorter belt | Gas Club Car | |||
92 carry all drive belt and starter belt | Gas Club Car |