![]() |
|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
![]() |
#1 |
Gone Wild
![]() Join Date: Sep 2010
Location: Erie, Pennsylvania
Posts: 989
|
![]() Hello to all:
I am getting ready to replace the primary clutch rollers in my 97 G-16 and was looking for advice as to what type to buy. I have found some rollers that look like they might be molded plastic, with collars, (similar in shape to the originals). I have also found some steel rollers, without the collars. (these do not look like the originals but are listed as the proper replacements). The plastic rollers are lower in cost by about $8-$9 per roller. I am looking for recommendations as to which type roller would be the best replacement. Thanks in advance for any advice on this. Ray in Erie,PA - ![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
Why steel instead of aluminum? | Electric EZGO | |||
PRIMARY CLUTCH ROLLERS-OLD vs NEW | Gas Yamaha | |||
steel wheels | Golf Carts and Parts | |||
12" steel wheels | Lifted Golf Carts |