lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-11-2012, 10:00 AM   #1
skip425
Not Yet Wild
 
Join Date: Jan 2012
Posts: 2
Question G22 Clutch rollers

I am replacing the clutch rollers in my G22 because a flat place
had been worn in two of them causing the OEM clutch to lockup

My question is when I replace them with new rollers should some
type of lube be applied to them where they contact the weights or
are they designed to run dry
skip425 is offline   Reply With Quote
 
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
Tips & Hints for installing Clutch Tuning Kit, Removal of Drive Clutch Gas Club Car
Replacing rollers in primary clutch in G-16 Gas Yamaha
Clutch rollers for 97 g16, plastic or steel ? Gas Yamaha
PRIMARY CLUTCH ROLLERS-OLD vs NEW Gas Yamaha


All times are GMT -5. The time now is 07:48 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.