![]() |
![]() |
#1 |
Gone Wild
![]() Join Date: Oct 2010
Location: Central New York
Posts: 871
|
![]() What's the best spot for the pulse line. I have it off the carb manifold but it doesn't put out as good as the valve cover hole I had in my old one. What's the best way to drill out the cover? There looks to be a two way flap in it. Do you drill through it on the side maybe?
|
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Gone Wild
Join Date: Oct 2010
Location: Pittsburgh Pa
Posts: 1,551
|
![]() When I had my clone I had it running to the spacer in between the carb and block. I couldn't even tell you how many times It ran out of gas. The only time I could get a decent pulse was when the carb plate was closed. I later drilled a hole in the valve cover and epoxied a 1/4 barb in it. Worked good. I would drill it on the top left. Make sure you go all the way through.
|
![]() |
![]() |
![]() |
#3 |
Gone Wild
![]() Join Date: Oct 2010
Location: Central New York
Posts: 871
|
![]() thanks
|
![]() |
![]() |
![]() |
#4 |
friends call me Boke
![]() ![]() Join Date: Apr 2008
Location: Smithfield, North Carolina
Posts: 7,772
|
![]() I may have an old valve cover with the barb in it already you can have for free.
|
![]() |
![]() |
![]() |
#5 |
Gone Wild
![]() Join Date: Oct 2010
Location: Central New York
Posts: 871
|
![]() Thanks that's very nice of you!! I drilled the cover threaded a barb in and it works great!!! Appreciate the offer though!!!
|
![]() |
![]() |
![]() |
#6 |
Vegas modded 420
![]() ![]() Join Date: Jun 2009
Location: West MI
Posts: 15,448
|
![]() I put mine in the side almost over the exhaust. Its the center spot the partition is against the outside. I bought a 1/8npt to barb fitting, the tap drill for that is not that big, just screw it in carefully. I put some permatex on it iirc.
http://www.buggiesgonewild.com/clone...tml#post756892 |
![]() |
![]() |
![]() |
#7 |
VC 460 CLONE GONE WILD
![]() ![]() Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 11,054
|
![]() JEEZ am I the only guy that carb spacer works well for?
|
![]() |
![]() |
![]() |
#8 |
Not Yet Wild
![]() Join Date: Nov 2011
Location: Down South East
Posts: 17
|
![]() Carb spacer works great for me. No problems yet.
|
![]() |
![]() |
![]() |
#9 |
Vegas modded 420
![]() ![]() Join Date: Jun 2009
Location: West MI
Posts: 15,448
|
![]() The other clone I did has the spacer pulse. Once it came off and pumped fuel all over the place. I don't really like it and will convert it some day.
|
![]() |
![]() |
![]() |
#10 |
Gone Wild
![]() Join Date: Jun 2012
Location: Central NY
Posts: 1,020
|
![]() Mine is in the adapter plate between the carb and block. Has worked perfect for me since day one. Weird...
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
fuel pump pulse line | Clone Engine Swaps | |||
pulse line on g1 | Gas Yamaha | |||
fuel pump pulse line | Gas Yamaha | |||
Puking Oil from pulse line | Gas Club Car | |||
Oil in pulse line for fuel pump | Gas Club Car |