![]() |
|
Electric Club Car Electric DS, and Precedent golf cars |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Just Gone
![]() ![]() Join Date: Sep 2015
Location: North Carolina
Posts: 3,549
|
![]() Really hate the look of the pre-2000 DS roof I have and was wondering if anyone found or tried a universal UTV roof, like Kolpin, that will work with a DS???
I really like the look of this roof; but it seems too wide and not long enough to look right over a DS. Any suggestions beside trying a Precedent or newer DS roof? |
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Gone Wild
![]() ![]() Join Date: May 2015
Location: Houston
Posts: 936
|
![]() You will need a roof at least 3-4 feet in length and about 4 feet wide. I would look towards some of the razor roofs or some of Polaris or,Kawasaki off road vehicles and you might find an option. Problem is the dimensions in width must be correct unless you fabricate your own roof struts.
|
![]() |
![]() |
![]() |
#3 |
Cave Dweller
![]() ![]() Join Date: Apr 2013
Location: Always On The Move
Posts: 22,765
|
![]() to me it would be to small to use the one you link to . I to hate the pre 2000 roofs on the DS. I went with a precedent roof , got it for 40.00 plus supports couldnt pass it up. It will be interesting to see if you find something else.
http://www.buggiesgonewild.com/elect...-roof-mod.html |
![]() |
![]() |
![]() |
#4 |
Just Gone
![]() ![]() Join Date: Sep 2015
Location: North Carolina
Posts: 3,549
|
![]() Yeah, a lot of the UTV roofs are 50+" wide but only 40+" long. It' s almost as if I could find a universal roof that would look good "sideways", I could figure a way to mound it like that since it would be close to the 56"x 43" I'll need. The search is still on.
|
![]() |
![]() |
![]() |
#5 | |
Just Gone
![]() ![]() Join Date: Sep 2015
Location: North Carolina
Posts: 3,549
|
![]() Quote:
Is the precedent roof thick enough that I could secure a 22" light bar to it? |
|
![]() |
![]() |
![]() |
#6 |
Cave Dweller
![]() ![]() Join Date: Apr 2013
Location: Always On The Move
Posts: 22,765
|
![]() |
![]() |
![]() |
![]() |
#7 |
Just Gone
![]() ![]() Join Date: Sep 2015
Location: North Carolina
Posts: 3,549
|
![]() |
![]() |
![]() |
![]() |
#8 |
Gone Wild
![]() Join Date: Jul 2009
Location: Liberty Lake, WA.
Posts: 1,762
|
![]() I made mine out of FRP.... or fiberglass reinforced plywood. It's black fiberglass on top, white on the bottom, then I painted the edges with black Plastidip, mounted a roof rack on top. Works great.
|
![]() |
![]() |
![]() |
#9 |
Cave Dweller
![]() ![]() Join Date: Apr 2013
Location: Always On The Move
Posts: 22,765
|
![]() you can see in the pics that i just left them open . i used the stock supports from the DS . never got the ones for the precedent
|
![]() |
![]() |
![]() |
#10 |
Just Gone
![]() ![]() Join Date: Sep 2015
Location: North Carolina
Posts: 3,549
|
![]() Have you had any problems with water draining onto your cart? I have a rear seat kit, do you see any problems with potential rear passengers getting wet?
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
Club Car roof | Golf Carts and Parts | |||
WTB Club car roof 82-99 | Golf Carts and Parts | |||
New Roof for 99 club car | Gas Club Car |