![]() |
|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Not Yet Wild
![]() Join Date: Mar 2009
Location: jacksonville, fl.
Posts: 4
|
![]() Hi Just found this site. I purchased an old EZGO electric golf cart 2 years ago and has worked just fine until last week when all kinds of noise started coming from the drivers rear wheel. When I removed the wheel parts of the wheeh bearing fell out. I removed the C clip and have spent 4 hours trying to remove the whats left of the outer race. I have this tool that is made to remove forzen torn up bearings but no go. I can't remove the passenger axle or bearing either. Any ideas. Have heated the bearing. If I get the other axle can I remove part of the rear end and put a section of rebar thur it and knock the bearing out. In the past on a boat trailer I had to cut and beat it out. Will taqke any help you have.
How do I find out what year it is. Only info is a plate with the sn# 694980 and mfg code 00792 Thanks |
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Happy Carting
![]() ![]() Join Date: Dec 2007
Location: Southern California
Posts: 73,965
|
![]() Welcome...Your cart is 1992....help is on the way
![]() |
![]() |
![]() |
![]() |
#3 |
Golf Cart Photographer
![]() Join Date: Jan 2007
Location: Wichita Falls Texas - My Ride 2010 Club Car
Posts: 6,236
|
![]() Hello mahonhm and Welcome to the forum.
|
![]() |
![]() |
![]() |
#4 |
Happy Carting
![]() ![]() Join Date: Dec 2007
Location: Southern California
Posts: 73,965
|
![]() I asked around about this .... seems you are gonna have to cut and remove what is left of the race with a dremmel?
|
![]() |
![]() |
![]() |
#5 |
Not Yet Wild
![]() Join Date: Mar 2009
Location: jacksonville, fl.
Posts: 4
|
![]() I cut it out. Now I'm not sure I even want look at the front wheel bearings. But thanks for your input.
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
How to remove bearings from rear end gears? | Gas Club Car | |||
Yamaha G9 camshaft bearings | Gas Yamaha | |||
Rear End Bearings | Electric Club Car | |||
Frozen engine | Gas Club Car | |||
need help/info on 96 CC front hub bearings!! | Gas Club Car |