![]() |
|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Not Yet Wild
![]() Join Date: Dec 2009
Location: Surfside Beach, SC
Posts: 15
|
![]() Hello folks,
I have a 2003 TXT series 36 volt cart. I just replaced all the batteries with Trojan605's (B1's brand new) and starting the break in. I am reading the break in instructions as I need to run it down to 75 - 80% (after initial full charge) and then charge completely. Does that mean I can look at the chart with 38.20 volts as a 100% charge and wait until my pack voltage reads in the 37.3 to 37.49 range before charging again completely? Thanks in advance for your help. Rick in Surfside |
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
just leave me alone
![]() ![]() Join Date: Aug 2008
Location: Tennessee
Posts: 5,643
|
![]() Since wet cell batteries have no memory , any time U run it for 15 minutes , plug it back in and let it charge.
Keep distilled water 1/4 to 1/2 above plates . to get batteries to peak performance it can take up to 100 charges. So next year sometime U'll be rocking :) |
![]() |
![]() |
![]() |
#3 | |
Happy Carting
![]() ![]() Join Date: Dec 2007
Location: Southern California
Posts: 73,965
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#4 |
Not Yet Wild
![]() Join Date: Dec 2009
Location: Surfside Beach, SC
Posts: 15
|
![]() Thank you GLEEMO and scottyb. As always, quality advice here.
Regards, Rick in Surfside |
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
Battery Break-in done right | Electric EZGO | |||
New Battery Break-in | Electric EZGO | |||
EZGO diagnostic flow chart question | Electric EZGO | |||
Battery Break in | Electric EZGO |