![]() |
|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Not Yet Wild
Join Date: Sep 2011
Posts: 9
|
![]() 2006 ezgo forward is reverse and reverse is forward. what wires do i need to cross?
|
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
......................
![]() Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,429
|
![]() Welcome to BGW
is your F/R switch on the dash?? and is there a tow/run switch on the cover of the controller under the seat, or is your F/R down by your knee?? what mods are done to the cart |
![]() |
![]() |
![]() |
#3 |
Not Yet Wild
Join Date: Sep 2011
Posts: 9
|
![]() Down at knee. it is raised up. just picked it up last night and took boys out for a ride and the sylnode overheated, so i bought a new one and thought i put it together exactly like it was ,but guess not. do u have a pic of one I can look at?
|
![]() |
![]() |
![]() |
#4 |
Not Yet Wild
Join Date: Sep 2011
Posts: 9
|
![]() there is no tow/ run switch. It has head and tail lights and is raised up.
|
![]() |
![]() |
![]() |
#5 |
......................
![]() Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,429
|
![]() On the F/R switch down on the passenger side of the cart, you need to switch the cables on the F/R switch ( D ) and the ( B ) , remove the main, pos and neg cables from the pack, make sure they DON"T touch any other wires, before you start on the F/R switch, look at the diagram
![]() |
![]() |
![]() |
![]() |
#6 |
Not Yet Wild
Join Date: Sep 2011
Posts: 9
|
![]() If I were not to change them around will it hurt the cart to run it like it is?
|
![]() |
![]() |
![]() |
#7 |
......................
![]() Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,429
|
![]() no it will not hurt any thing the way it is
![]() |
![]() |
![]() |
![]() |
#8 |
Not Yet Wild
Join Date: Sep 2011
Posts: 9
|
![]() no need in messing with it then if it aint broke!!! Thanks, time to go grab a cold one and ride this puppy then!!!
|
![]() |
![]() |
![]() |
#9 |
Gone Wild
![]() Join Date: Jul 2011
Location: Panama City, Fl.
Posts: 401
|
![]() With that cold one.....don't forget which is reverse......and if anyone else uses it. If the reverse beeper works, that would help for safety.
|
![]() |
![]() |
![]() |
#10 |
Not Yet Wild
Join Date: Sep 2011
Posts: 9
|
![]() Ok I pur new solenoid and new controller but I have no forward or reverse. I tryed disconnecting pos battery to rebOot solenoid but nothing is working, what can I try next to be able to ride!!!!
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
Reverse alarm sounds in Forward, wont go forward or reverse | Electric Club Car | |||
Reverse alarm stuck - motor won't run forward or reverse | Electric EZGO | |||
Alarm sounding in forward. No movement in forward or reverse | Electric Club Car | |||
2006 TXT no forward or reverse | Gas EZGO | |||
Forward Reverse switch melted on forward...have question about replacement part | Electric Club Car |